so.. what is your comment on the chiller (compared with Sfiligoi , TECO)
thanks
jay
文章: 3300
17 于 2004-03-03 00:20
老坑
please.....
老坑
文章: 2259
18 于 2004-03-06 14:47
dear jay...... sorry sorry......i didnt follow up this post.......very sorry my chiller is satisfactory..........and i never use Sfiligoi and TECO before.....so cannot make any comparision. best regards.
jay
文章: 3300
19 于 2004-03-06 20:09
老坑
thanks a lot
MacKing
文章: 41
20 于 2004-04-10 21:34
老坑, 你的木箱是宜家買的嗎?
出入水的問題解決了沒有? 可否影張相看看? Thanks!
老坑
文章: 2259
21 于 2004-04-27 15:34
sorry Mac sir..... didnot follow this post yes...the box is from 宜家 ....but it didnt fit well with the chiller, so need to raise the height and deepen the back the in and out is just bypass the back of the carbinet only....and sorry that i havent take any photo
so.. what is your comment on the chiller (after several months)
i incline to either: 1. high end: fishcooler (in terms of its efficiency) 2. low-end Resun (in terms of its 'low' price)
thanks
jay
文章: 3300
25 于 2004-06-13 20:31
hi 老坑
please.....
老坑
文章: 2259
26 于 2004-06-16 22:03
hi jay, sorry that i overlook this post again and agin the fishcooler is ok for me, noise ok...i dont even know it is working... effectiveness ok to me...it works within 0.5C... dimension is great too....but price is a bit high
jay
文章: 3300
27 于 2004-06-17 13:59
thank you for your info.
老坑
文章: 2259
28 于 2004-07-05 15:57
水冷機背熱氣吹之不去....啜埋就好好多了
老坑 修改于 2004-07-05 15:58
miulo
文章: 67
29 于 2004-07-14 02:55
How does your 啜pump work? Where to buy and how much? Sorry, so many questions.
老坑
文章: 2259
30 于 2004-07-14 09:08
it just sucks the air at the back and blow out .... from cheung so kee also
顯示適合列印的版本 
寄給朋友
16 于 2004-02-18 19:31 
