鬧 市 冰 室 SID:791259765625000

資料庫 | 相薄共享 | 即時聊天 | 搜尋文章 | RSS | 24 | 用戶注冊 | 用戶登入 | 排行榜 | 文章統計

» 鬧 市 冰 室 » Filter Media and Equipment ◇過濾器材◇  

顯示適合列印的版本 顯示適合列印的版本  把這個主題寄給朋友 寄給朋友
按平行模式觀看按樹型模式觀看前一篇主題后一篇主題
前一頁  1   2  后一頁
作者 Iwaki Pump
swu





文章: 154
1 于 2002-05-06 22:12  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
I have ordered a tank with size 40"W x 20"D x 30"H and the shopkeeper told me that I can use Iwaki Pump 30RX for the water filtration. He told me that 40RX is too powerful and not recommended to use for this size of tank. Can anyone give me an advice for this?


iczfirz
"challenge"
"challenge"



文章: 14186
來自: 我回來了
2 于 2002-05-06 22:35  觀看該用戶的個人資料  主頁: http://www.aquarium.org.hk  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
幾多升適合你我就不知道.. 只知道如果你行一轉到新填地街.. 你會慳d錢..



問題或承受過 不相信拋下過 最後決定一雙肩膊別太肩膊
三十一畫:此數大吉,名利雙收,漸進向上,大業成就。(吉)
Kenny





文章: 2286
來自: Shatin, N.T.
3 于 2002-05-06 22:52  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
swu,

My tank is just the same as yours. I was recommended to use a 40RX. 覺得有小小勁咗D的感覺,但應該無問題,循環得快點吧。Maybe you can use a 30RX and we can compare later.



養魚係一個贏贏的遊戲---a Win-Win game. You can win, I can win, all of us can win in the game at the same time. ^^
swu





文章: 154
4 于 2002-05-06 23:44  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
I would like to connect the UV light from the outlet of the pump. I am afraid the 30RX may have a problem if I install it with the UV light. However, the shopkeeper told me that 40RX may burn out because the tank volume is not big enough to cater the capacity for this model. Can anyone give me an advice on this case?


Kenny





文章: 2286
來自: Shatin, N.T.
5 于 2002-05-07 01:47  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
swu,

Which shop's shopkeeper told you that 40RX may burn out because.............questionquestionangrydisapprove I only believe that the 40RX may burn out if you turn it on with no water.



養魚係一個贏贏的遊戲---a Win-Win game. You can win, I can win, all of us can win in the game at the same time. ^^
Kenny





文章: 2286
來自: Shatin, N.T.
6 于 2002-05-07 01:53  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
My 40RX has been using about two months and it still perform well.



養魚係一個贏贏的遊戲---a Win-Win game. You can win, I can win, all of us can win in the game at the same time. ^^
swu





文章: 154
7 于 2002-05-07 09:23  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
"Pa Long". Since the price difference is not significant, I think I will consider to use the 40RX instead of 30RX.


Roger





文章: 41
8 于 2002-05-08 01:16  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
hi...swu
             我上星期都在川x買了一部RX40,我個缸48X24X30用落我覺得剛剛好,
你個缸又細我小小,所以我勸你都是用RX40過瀘循環又快,在川X,30同40價錢差好少.....


swu





文章: 154
9 于 2002-05-08 22:14  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
Roger, thanks for your advice. Can you give me some advice for the pipe connection? I have a hesitation for the pipe connection work. If possible, please give me some hints.


Roger





文章: 41
10 于 2002-05-09 00:43  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
Hi swu..
              我都0係 魚友manman幫我整,我由漏流曹落水到沙缸用30mm喉,
上水用20mm喉,個Iwaki泵個出入水口0係用20mm曲喉連接.
你睇0下manman魚缸相可能會清楚.


Gundaman





文章: 750
11 于 2002-05-09 07:02  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
Roger,

Is it difficult to install the piping work? Anything need to be installed by yourself? I once asked the shopkeeper at Rivulet that the installation charge is around $1,xxx.

Thanks.big smile


Gundaman 修改于 2002-05-09 07:03
Roger





文章: 41
12 于 2002-05-10 00:53  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
Gundaman..
                    我完全同意你0既講法,我以前都0係比人裝,裝得又唔好重要收我
$1200.因我唔想用潛水泵上水,轉用Iwaki 好力0的先叫manman幫幫手.
川x0的裝工我相信都唔差.
其實我都建意"swu"比錢搵人裝好...............


swu





文章: 154
13 于 2002-05-10 12:37  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
If I want to install a UV light, UV light should connect after the Iwaki pump or just use a power head to drive the UV light circulation within the chamber. First method is ensure all the water back to the main tank must pass through the UV light. Second method is only for certain portion of water pass through the UV light. However, the maintenance work is more easy to provide. Can anyone advice which method is more preferrable.


Kenny





文章: 2286
來自: Shatin, N.T.
14 于 2002-05-10 13:04  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
swu,

If you use the first method, I think you need to use a more powerful UV, said 25W, to deal with the great water flow. I adopt the second method and use a 15W one since when I add the UV, my tank's piping had already been set up. It is troublesome to use the first method for me and "ah lok" from Rivulet advised me to adopt the second method.



養魚係一個贏贏的遊戲---a Win-Win game. You can win, I can win, all of us can win in the game at the same time. ^^
swu





文章: 154
15 于 2002-05-10 14:29  觀看該用戶的個人資料  搜尋這個用戶發表的所有文章  把文章內容复制到剪貼板。
只适用于 IE :-)
Kenny. I believe you must have a valve to control the water flow for the circulation. Where you place it? Before or after the Iwaki pump (or maybe both side)? Someone said that they need to dismantle the pump to clean up the salt if the pump is getting some noise. If no valve control before the pump, dismantle the pump may cause flooding. If only one valve before the pump, the pressure maybe to strong and burn out the pump. This is just my logical thinking only. Please share your experience for me. Thanks.



» 鬧 市 冰 室 » Filter Media and Equipment ◇過濾器材◇  

顯示適合列印的版本 顯示適合列印的版本  把這個主題寄給朋友 寄給朋友
按平行模式觀看按樹型模式觀看前一篇主題后一篇主題
前一頁  1   2  后一頁
  看過的文章
  新的文章
  被刪除的文章
跳轉到

我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:8.03, System:1.16, Children of user:0.26, Children of system:0.6


請大家技持更換新主機啦, 多謝!