請問H&S化氮器點教先好

» 鬧市冰室 » Protein Skimmer ◇化氮器材◇ 顯示適合列印的版本寄給朋友

作者

請問H&S化氮器點教先好

小念頭

我係傻佬~但唔低B

文章: 339
來自: 天水圍

1 于 2002-09-27 11:08

yinchai和各位魚友：我將出水位開盡（拎到2粒白點成直線），氣喉較到D泡
                                   係杯底慢慢升上收集杯，現都行左10個鐘D泡打出黎有D油
                                    屎既野，咁樣現像OK嗎？
                                    重有收集杯放在筒身時要拎入去的，但在運行時有水係
                                   個拎蓋面有水浸出黎係咪正常呢？請各位賜教！

yinchai

藍精靈;十分勁!

文章: 1512
來自: 香港仔

2 于 2002-09-27 11:34

小念頭:
你個 old skimmer...賣左比邊個..?
這是我較法: (只供參考)
1.白點同白點大約距離10-15mm左右
2.入氣喉全開(即不用個夾)
扭入去位...因有時扭得不夠力...會有小小滲水...應該問題不大..

日出日落自然事別見夕陽嘆暮遲
盛衰本來有交替夕去朝來總有時........

小念頭

我係傻佬~但唔低B

文章: 339
來自: 天水圍

3 于 2002-09-27 12:07

yinchai wrote:
小念頭:
你個 old skimmer...賣左比邊個..?
這是我較法: (只供參考)
1.白點同白點大約距離10-15mm左右
2.入氣喉全開(即不用個夾)
扭入去位...因有時扭得不夠力...會有小小滲水...應該問題不大..

多謝賜教！

請在pm查看

ufnec

文章: 64

4 于 2002-09-27 15:49

我就set到個水出最大,但係就較細左個入氣.打出黎d 0野就好黑冇咁多水係個收集杯到
你拎實d個杯就唔會有水浸出黎

小念頭

我係傻佬~但唔低B

文章: 339
來自: 天水圍

5 于 2002-09-27 21:53

ufnec wrote:
我就set到個水出最大,但係就較細左個入氣.打出黎d 0野就好黑冇咁多水係個收集杯到
你拎實d個杯就唔會有水浸出黎

ufnec兄：水出最大係咪出水果2粒白點成直線呀？氣喉較細D泡會好慢聚集升上收集杯所以會好黑但無咁多水呢？有努ufnec兄回覆及多謝賜教！

ufnec

文章: 64

6 于 2002-09-28 14:46

小念頭 wrote:
ufnec兄：水出最大係咪出水果2粒白點成直線呀？氣喉較細D泡會好慢聚集升上收集杯所以會好黑但無咁多水呢？有努ufnec兄回覆及多謝賜教！

係

ken2288

文章: 24
來自: Basement of Hell

7 于 2002-10-02 23:20

Dear all,

I was about to buy a H&S skimmer (the one for 400L) last Sunday in GBR. However, I was told by the shopkeeper that the water discharge outlet of the skimmer should be placed above the water level in order to optimize the efficiency. Is it a must for such arrangement? The water level of my sump is about 22" and there is only 8" left on top of water. I'm afraid it can't accommodate the skimmer with such arrangement.

Tks.

文章: 63

8 于 2002-12-10 17:49

I bought one H& S external skimmer yesterday. However , i found out 運行時有水係個拎蓋面有水浸出黎係咪正常呢？I am very nervous since i scare to flood my floor. How long for the foam to come out the dirty? Please help.!!!

jay

文章: 3322

9 于 2002-12-10 19:01

hi all

i want to know that
h&s include "internal" and "external" series

is it necessary for "BOTH" type that:
the power heads should be placed under water level
if so,
what is the advantage of using external
(what is its main differences from "internal" type)

" external " seems to be a little bit more expensive than
"internal", i am puzzled with which one is more suitable.

thanks

Sunsun

文章: 116

10 于 2002-12-10 19:49

LP兄:
應該係唔會有水漏既
我用缸內既都冇漏
你試下會唔會你紐唔實?(都要幾大力下)

jay兄:
內置同外置既最大分別係
內置個泵係用黎引水同時打氣
外置係由另一個泵引水入個skimmer度
skimmer身個隻泵係用黎打氣
引水個泵當然都係要放係水中啦
主要係用係冇沙缸既缸(支野係放出面既)

但係以我所知亞媽記有個內置既佢都改左外置(但唔知而家仲有冇係度因為好耐冇去)

jay

文章: 3322

11 于 2002-12-11 14:44

thanks to sunsun 's advice first

i wonder which shop is "best buy" for H&S skimmer
taipoXXX
amzXXX
or somewhere?

thx

文章: 63

12 于 2002-12-11 16:21

amazXX have much more polite manner. And the price is a little bit lower than TaiPoXX. The boss in amazXX explains to me in very good manner. May be a H&S Skimmer is not cheap~~ However, my H&S have water come out from the cup. I need to go to ask the boss again and may need to replace with another one....

文章: 63

13 于 2002-12-12 23:46

I exchanged a new H&S skimmer and it is good!! No water leakage now. Good manner for amaXXX boss. I give a credit to him.

iwave

性愛島黃吊

文章: 2993
來自: 迷失性樂園

14 于 2002-12-18 20:22

請問最新的價錢係幾多啊？
H&S for 400L 連 Pump.

48"x24"x32" 上下滴溜FOT魚缸： 29.5~31度
UFO CLASSIC 150W 14000K x2 + 30W FL BLUE x2、IWAKI MX-70V-13上水泵、PINPOINT PH 錶、DE BARY 25W UV 殺菌燈 x2套、H&S150-F2001(850L 對應)化氮、SAGA ORP CONTROLLER、OZONE MAKER、大沙樽…

swu

文章: 154

15 于 2003-03-28 11:00

I tune it several times. All water goes up to the collection cup very fast. I have tried to place it from water level to now 1-2" above the water surface. Please help?

» 鬧市冰室 » Protein Skimmer ◇化氮器材◇ 顯示適合列印的版本寄給朋友

看過的文章

新的文章

被刪除的文章

跳轉到

我地有在新的聊天室
即時聊天廣播.

[Processing Time] User:4.27, System:0.32, Children of user:0.03, Children of system:0.06

請大家技持更換新主機啦, 多謝!