Topic: 緊急!!PO好高,點搞?

  Print this page
緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-20 15:31

緊急!!PO好高,點搞?
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-10-20 15:58

買吸鱗珠囉. 我用開SeaChem果隻效果幾好，魚街好多鋪都有得賣 :)
回覆： 緊急!!PO4好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-20 17:05

唔該, 用NO3過濾槽(黑白波個種)可唔可以降低PO4?
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: deechand
Posted on: 2003-10-20 19:24

係唔可以化除PO4.

聽聞外國有人用氫氧化鋁Al(OH)3來做PO4化除器吸PO4,唔知係唔係真?
回覆： 回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-10-21 10:57

deechand wrote:
係唔可以化除PO4.

聽聞外國有人用氫氧化鋁Al(OH)3來做PO4化除器吸PO4,唔知係唔係真?



咁利害，PO4都有化除器 :O) 段估今次唔係用菌食AlOH3拉掛 :P
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: deechand
Posted on: 2003-10-22 21:21

唔關菌事, 好似係同化學返應有關,目的係鎖著D PO4 離子, 類似或可能就係SeaChem PosphateGuard D 白珠球.
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-27 13:12

買左罐SeaChem(1.2kg),點用啊？我個缸有800升水，用幾多先得，順便問下用幾耐．唔該！
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-10-27 14:09

照說明分量，用網袋袋住，放係水流最多最快的地方就ok，記得定期換.
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-27 20:24

我個就是罐無寫點用（我是話分量）點搞？
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-10-28 09:13

1.2kg...你會唔會係買錯野? 果隻除磷珠叫 Seachem Phosguard 定 Phosphate guard 喎，無記錯大裝都係得半kg...你買果隻係叫乜名 :?)
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-28 21:56

Phosguad NO using guide line
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-10-29 08:57

說明係樽面招紙過喎....不過我今晚返去睇睇我果樽聽日話你知拉:)
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-10-29 21:54

唔該
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-11-03 11:53

golbaldavid, sorry for my late reply. As per the direction on the label, you should use 250mL for every 300L water. Place the phosguard at place with maximum water flow. Replace only when level of phosphate climb up again.
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-11-03 15:54

Thanks! But how I can mesaure 250ml 'cause it is not liquid.Can you pls guide me how much weight for 300L water? THX AG!
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: 康仔
Posted on: 2003-11-04 12:44

As read from the label, I believe it should be mg instead of mL, as the version that I am using is 250mg(?) per bottle. But as far as I gather from the instruction, overdose will cause no harm. You may just use a 紗袋 to place approximately 250Mg phosguard, rince them under tap water first and than place it the tank with where there is strong current :)
回覆： 緊急!!PO好高,點搞? Copy to clipboard
Posted by: globaldavid
Posted on: 2003-11-05 12:48

thanks I will try.
我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:0.08, System:0, Children of user:0, Children of system:0


請大家技持更換新主機啦, 多謝!