Topic: 皮革 |
 Print this page
|
| 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-17 04:00 點解新皮革落缸個body會變青色,跟住開始溶?本身缸入面d又冇事,試過3件都係咁? | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: mrT Posted on: 2006-10-17 10:14 非洲皮?落缸一直無開過就爛?其它係魚缸入面既皮革就冇事? | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-17 13:44 mrT wrote: 非洲皮?落缸一直無開過就爛?其它係魚缸入面既皮革就冇事? 非仔1件,普通皮革2件都係咁,落缸一直無開過就爛,魚缸入面既皮革就冇事.:( | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: mrT Posted on: 2006-10-17 15:43 皮革未開就爛,如果唔係買之前以經有問題既話,一般都係環境不適同水質有關.... 有冇換位放下?皮革其實對水質要求唔算高,個人經驗除非水中po4的含量突變超過0.25... 或者你有無用吸磷珠?都會有影[$#21709].... | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-17 17:45 mrT wrote: 皮革未開就爛,如果唔係買之前以經有問題既話,一般都係環境不適同水質有關.... 有冇換位放下?皮革其實對水質要求唔算高,個人經驗除非水中po4的含量突變超過0.25... 或者你有無用吸磷珠?都會有影[$#21709].... 我用Seachem-----Phosguard.會唔會我缸d水[$#22021]po4同魚店相差over0.25?如是又應該點做?我有對水over1小時ga.係咪要拿起吸磷珠? | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: mrT Posted on: 2006-10-18 14:24 有轉水就解決左水質突變的問題了... 無論seachem或kent既吸磷珠都有令皮革爛既個案發生過,用ROWA會好d... 拎起d吸璘珠先,[$#20004]星期內換50-60%水,之後再試試..應該得既... | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: 康仔 Posted on: 2006-10-18 14:58 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-19 02:46 mrT wrote: 有轉水就解決左水質突變的問題了... 無論seachem或kent既吸磷珠都有令皮革爛既個案發生過,用ROWA會好d... 拎起d吸璘珠先,[$#20004]星期內換50-60%水,之後再試試..應該得既... 已[$#25886]起除磷珠,[$#36933]d比report你,thx:) | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-19 02:48 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 其他普通皮革有冇大影響? | |
| 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: 康仔 Posted on: 2006-10-20 12:08 Saltfishman wrote: 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 其他普通皮革有冇大影響? 普通皮頂得好d, 不過都要睇品種...整體d花花都睇到開得差d, 甚至唔開花:~) | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-21 01:57 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 放d生銹釘得唔得? | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: 康仔 Posted on: 2006-10-21 17:33 唔好咁搏好喎B) 可能好多雜質架喎... | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-22 00:55 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 有冇份量ga? | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-24 09:09 mrT wrote: 有轉水就解決左水質突變的問題了... 無論seachem或kent既吸磷珠都有令皮革爛既個案發生過,用ROWA會好d... 拎起d吸璘珠先,[$#20004]星期內換50-60%水,之後再試試..應該得既... [$#21709]東海買左件試水,ok,我可以入非仔囉:),不過都係遲多2個星期安全d,係咪? | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-24 09:11 mrT wrote: 有轉水就解決左水質突變的問題了... 無論seachem或kent既吸磷珠都有令皮革爛既個案發生過,用ROWA會好d... 拎起d吸璘珠先,[$#20004]星期內換50-60%水,之後再試試..應該得既... ROWA幾$左右? | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: 白熊 Posted on: 2006-10-24 09:51 除磷珠除左ROWA-Phos, 其他既都要吸飽就掉, 唔係D磷會回流架...... 實際用法一定要睇清楚個使用說明... 1L裝ROWA-Phos魚街賣$5XX, 朋友報料比我既..... | |
| 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-10-24 09:56 白熊 wrote: 除磷珠除左ROWA-Phos, 其他既都要吸飽就掉, 唔係D磷會回流架...... 實際用法一定要睇清楚個使用說明... 1L裝ROWA-Phos魚街賣$5XX, 朋友報料比我既..... WA !!!!! | |
| 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: 康仔 Posted on: 2006-10-24 10:27 Saltfishman wrote: 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 有冇份量ga? 除磷液視乎魚量同餵食, 每星期100L用5ml咁上下, 好貴下...生鏽鐵粉因嫌煩, 用左一包無再用, 唔記得份量lu:~) | |
| 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: 康仔 Posted on: 2006-10-24 10:37 Saltfishman wrote: $#21709]東海買左件試水,ok,我可以入非仔囉:),不過都係遲多2個星期安全d,係咪? 小心, 非仔好弱雞, 同普通皮唔同...最好等遲d件普通皮keep到開到彭彭聲先入非仔會安全d;) | |
| 回覆： 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: fish1963 Posted on: 2006-11-01 16:19 康仔 wrote: Saltfishman wrote: $#21709]東海買左件試水,ok,我可以入非仔囉:),不過都係遲多2個星期安全d,係咪? 小心, 非仔好弱雞, 同普通皮唔同...最好等遲d件普通皮keep到開到彭彭聲先入非仔會安全d;) 但點解D人又話非仔好貴但好養呢? | |
| 回覆： 回覆： 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: Saltfishman Posted on: 2006-11-02 23:17 fish1963 wrote: 康仔 wrote: Saltfishman wrote: $#21709]東海買左件試水,ok,我可以入非仔囉:),不過都係遲多2個星期安全d,係咪? 小心, 非仔好弱雞, 同普通皮唔同...最好等遲d件普通皮keep到開到彭彭聲先入非仔會安全d;) 但點解D人又話非仔好貴但好養呢? Who sad that?佢係好貴,但對水質好敏感,我就領野:( | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: coralaholic Posted on: 2007-04-27 23:16 Phosguard will remove PO4 and release Aluminum which kills leathers. | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: ximen Posted on: 2007-04-30 09:32 請問rowa除磷珠邊樹有得[$#34130]呀?:P | |
| 回覆： 回覆： 回覆： 回覆： 皮革 | Copy to clipboard |
|
Posted by: coralaholic Posted on: 2007-05-19 19:54 康仔 wrote: Saltfishman wrote: 康仔 wrote: 玩皮革最好用除磷液或生鏽鐵粉...我以前用除磷珠, 停用左好耐仲係狂換水件非皮B近來先至叫做開得靚d:~) 有冇份量ga? 除磷液視乎魚量同餵食, 每星期100L用5ml咁上下, 好貴下...生鏽鐵粉因嫌煩, 用左一包無再用, 唔記得份量lu:~) 生鏽鐵粉 sounds like it is Heavy Metal to me. It is true that 生鏽鐵粉 contains Iron Oxide, which is not toxic to Leather (皮革) and will absorb PO4, but just don't take the risk as it may contains Iron (Not Iron Oxide) or other Heavy Metal which is toxic to all marine life!!! PO4 absorbers recommended here are "Rowaphos" and "PHOsAR", both contains Iron Oxide (Not Heavy Metal) and they will NOT release PO4 back to the water. However they can and will become saturated and will no longer remove PO4. For this reason I replace all chemical media every 30 days no matter what! That gaurantees optimum performance. Test kits can offer false readings also, so change every 30 days to be safe. Also remember that, as I have post before, Phosgard uses Aluminum Oxide for absorbing PO4, however, Aluminum Oxide is toxic to Leather, so just don't use it!!! | |
| 回覆： 皮革 | Copy to clipboard |
|
Posted by: paulmoks Posted on: 2007-06-05 17:03 轉水轉左幾耐呀,非仔最好轉水時間長[$#21874] | |
即時聊天廣播.
All Rights Reserved.
[Processing Time] User:0.87, System:0.09, Children of user:0, Children of system:0.02
請大家技持更換新主機啦, 多謝!