Topic: 各大老唔該!睇睇

  Print this page
各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-03 17:57

為了方便記錄舊圖已改,請向下
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-03 17:58

rack
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-04 09:20

D上水面水過,sorry黑小丑兄不太明白 ,謝謝你回應本貼
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 白熊
Posted on: 2006-04-04 09:43

唔係丁丁, 又唔係大老/大佬/太佬....但係"太老"....多咀答[$#21523]先:P
魚缸 : 黑muk muk, 老人家有老花, 睇唔清...
柜 : 6呎柜前面起碼加一條活動"柱"...
底缸 : 要一格底過一格先好"走水", 下面得一吋過水少左D, 最少2.5吋啦...B [$ C 放濾材果格大左D...應該响]第一格同第四格加返大....
第一個放化氮, 亦可同時放濾材...... 第四格要儲水, 6呎缸水量唔少, 水流量亦大, 留失水份亦相對多....否則日日要加水, 除非加自動補水系統.....
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-04 11:04

因為你老人家兩面走所以我唔好意思在標題加你個名.見諒!
白熊兄 謝謝回覆,小弟會跟進,立即改圖再post.

1.魚缸 : 黑muk muk, 老人家有老花, 睇唔清...立即改圖,唔好意思
2.柜 : 6呎柜前面起碼加一條活動"柱"... 我就是怕放唔入沙缸,立即加
3.底缸 : 要一格底過一格先好"走水", 下面得一吋過水少左D, 最少2.5吋啦...B [$ C 放濾材果格大左D...應該响]第一格同第四格加返大.... 係唔係A高過B高過C高過D
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-04 14:25

my tank
各大大請指導
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-04 14:26

my sump
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 白熊
Posted on: 2006-04-04 21:38

底缸我覺得好左好多..... :P
魚缸既滴漏槽.... 外外內內, 高高低低就好難幫到你, 要同個泵夾過先知....到時玻璃chi好後好難改, 唯有改"梳板"既粗幼及長短....
你個六尺缸, 起碼六分上水, 吋二落水啦....但一般大大地既水泵都係一吋上水, 你問左水泵既資料先啦...
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-06 10:48

首先多謝白熊兄唔怕我蠢
SORRY 我個缸5.5呎,唔好意思.改細左
1.我打算聽你講用powerJet7000好似七仔兄,唔知一個夠唔夠
2.一般外槽內槽相隔幾多0.5吋夠唔夠
3.現在改為1吋落水(入沙缸)X2 1吋(泵)上水X1
4.防回流孔位置的高低sorry完全唔知???在那開?多大?不怕入水時出水嗎?

今日搵朋友燒架,快D,快D

謝謝白熊兄! :>
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-06 15:23

轉貼七仔兄的回信
不需左右滴溜槽，單邊一個夠了。
沙缸尺寸大有改善空間......視乎你上水泵大細，我就覺得過倉玻璃離底1.5"-2" 就乜都夠，分倉玻璃1.5" 亦足明夠；個人鐘意尾倉由面入水，唔會有油膜，尾倉一定要夠大，再計算主缸停泵後回水量(取決於出水灰喉的防回流孔位置的高低)，再配合沙缸尺寸，然後先決定沙缸每倉的水位高度。(盡量用盡沙缸位置！)
要準確的話，容水量請以缸內度尺寸計算。 祝成功！

---------------------------
相簿 : http://www.pix.com.hk/kennyau

thanks a lot 7
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 七仔
Posted on: 2006-04-06 17:43

做乜要我出醜？我吹水架乍:8):8):8)
各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-15 11:11

想問powerjet 7500 出水2個分上下得唔得食?????
如果powerjet10000會唔會太大,太大怕唔怕??
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 七仔
Posted on: 2006-04-17 01:33

PJ7500 一分二得，但咁大個缸用一個唔夠掛....2個啦,1個死左都仲有個,安全d........ :P
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-17 10:10

多謝7兄意見,但係2個好金,考慮,考慮!!
用2個咪要多條喉上?

進度:

燒架朋友燒錯了,再改.
個缸都未開波,sorry
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 七仔
Posted on: 2006-04-18 09:21

咁大個缸遲d仲金....:P
對...如果2個泵就要2條喉上。
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-19 01:26

咁大個缸遲d仲金....????
????
點解???
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 白熊
Posted on: 2006-04-19 09:34

每日一字.....
金=甘=大鑊=麻煩

詩經有云....吳于甘已, 即係 : 我哩次大鑊啦, 或者, 我哩次麻煩啦... :P:D 就係咁~~~~~咁解既:I
回覆： 丁丁兄及各大老,please help help! Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-19 11:27

my tank :66x20x30
my sump:60x20x24
我唔需要做強水流

pj7500如果唔得.
pj10000會唔會太大
另外aquqbee係唔係ab pump?
外國pump ,合我用有什麼好介紹?

謝謝各大哥大姐!!!!
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-21 19:07

自己覆下先

唔好意思
比d意見!
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: renewdanny
Posted on: 2006-04-22 01:10

用10000都得架,1出4加兩個閘lor,覺得弱未關細個閘佢lor, ok?
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: lai
Posted on: 2006-04-22 01:26

I try to calculate your tank volume, and found that your total tank volume is at least 890L ( 60% volume in sump and the water depth is 28" in main tank ie. 606L + 0.6 x 471L = 888.8L )
But the pump is required to have at least 10 times the flow rate of tank volume, therefore, pj 10000 can only meet the lowest requirement of circulation and it is not include the problem of current in tank, I may agree with that 2 pj 7500 pump is the best. ( just share my own opinion.)
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-22 10:06

thanks for your sharing
I will try to use PJ 11000 i prefer to use 1 pump may be i will buy another one 海利泵 for spare.......o.......what can i use????is the best????2 or one???

anyway THANKS a lot Lai兄 and renewdanny兄
HAVE A NICE WEEKEND
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: ivan0227
Posted on: 2006-04-22 12:51

:)兩個泵好d.預大好過到時唔夠又要後+.
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-22 17:23

ivan0227 兄謝謝意見先.
我最怕2個泵太大,因為我唔使做流.而且2個泵要2條喉好左地方
唔知有沒有什麼意見?...............好煩.....唔知點好???
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: ivan0227
Posted on: 2006-04-22 19:00

:)慢慢諗, 無需要煩, 兩個上水泵係+強循環, 另外你諗住養魚定珊瑚呢?
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 七仔
Posted on: 2006-04-23 02:47

唔使做流？意思係你會另外用缸內造流泵？還是你主意玩靜水？
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-25 16:15

7兄
我玩淡水,所以唔洗做流
回覆： 回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 貓貓樣
Posted on: 2006-04-25 17:16

七仔 wrote:
唔使做流？意思係你會另外用缸內造流泵？還是你主意玩靜水？



[img]http://www.aquarium.org.hk/ch/images/faces/user1286.gif[/img]••••••
回覆： 回覆： 回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: catlee
Posted on: 2006-04-25 17:19

貓貓樣 wrote:
七仔 wrote:
唔使做流？意思係你會另外用缸內造流泵？還是你主意玩靜水？



[img]http://www.aquarium.org.hk/ch/images/faces/user1286.gif[/img]••••••


[img]http://www.siubing.com/siuto/pics/m81.gif[/img]••••••
回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 二灼
Posted on: 2006-04-26 00:29

各大老我的意思是"等水自己流入槽,落沙缸,然後用上水泵,上水.就o.k.缸內沒有泵.(我想這樣應有少少流)
唔知有無問題,煩請指導.
回覆： 回覆： 各大老唔該!睇睇 Copy to clipboard
Posted by: 貓貓樣
Posted on: 2006-04-26 00:49

二灼 wrote:
各大老我的意思是"等水自己流入槽,落沙缸,然後用上水泵,上水.就o.k.缸內沒有泵.(我想這樣應有少少流)
唔知有無問題,煩請指導.



缸內水流唔充足，食物殘渣及魚既排泄物便會因而積聚在缸內，試下用常理去分析，就知有無問題••••••
我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:0.16, System:0.03, Children of user:0, Children of system:0.01


請大家技持更換新主機啦, 多謝!