Topic: IS's SPS tank

  Print this page
IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 09:48

請多多指教

主缸 : 155 * 81 * 68 L * W * H 12 mm 英國皮爾金頓( Pilkington) 超白玻璃

底缸 : 113 * 60 * 45 L * W * H 8mm 英國皮爾金頓( Pilkington) 超白玻璃

馬達 : Red Dragon 10000

蛋白 : Bubble king 400 internal

鈣反 : Deltec PF600 with Masterflex（EW-07554-90）
　　 Rowalith C + and PH controller

燈具 : HQI BLV 250 W *2 , T5 AB 54W * 2, VHO Super Actinic 140W * 2
          ( all with IceCap )

]造浪 : Tunze 1 * 6000 with UPS. 1 * 6100 and 2 * 6200 with 7095

監控 : AquaController II. American Marine pH and Calcium

冷卻 : Panasonic 1.8 with Eliwell * 2

加熱 : Jager 200w * 2, One by Medusa temperature controllers and another by X 10

補水 : RO/DI, Tunze Osmolator Universal , Kent Marine Float Valve Kit

沸石桶 : JNS + Eheim 1250　　
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 09:58

鍛造的底櫃
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:01

正面
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:03

兩側開門
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:11

背面
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:13

底部
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:16

撲上底板及周圍護欄
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:18

側邊
回覆： Is's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:21

側邊蓋上鍛鐵板
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:27

噴上底漆
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:36

全開正面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:38

第２層底漆
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:42

側邊樣子
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:45

側邊完成品
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:51

正面圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 10:54

完成圖（內加２片５mm茶色強化玻璃及鎖頭）　
回覆： IS's SPS tank Copy to clipboard
Posted by: bear
Posted on: 2005-10-23 11:08

強檔出擊.絕對有看頭.推~~
回覆： IS's SPS tank Copy to clipboard
Posted by: chung3
Posted on: 2005-10-23 12:06

請問要幾$$$$$.........:I
好喜歡:D:D
回覆： IS's SPS tank Copy to clipboard
Posted by: 小羔羊
Posted on: 2005-10-23 12:21

有一大作品呀.:O):O)

   期待期待期待期待期待:^):^):^)
回覆： IS's SPS tank Copy to clipboard
Posted by: GTI
Posted on: 2005-10-23 12:21

期 待 更 多 照 片 。。8D
回覆： IS's SPS tank Copy to clipboard
Posted by: 小羔羊
Posted on: 2005-10-23 12:22

又一大作.:O)

期待 期待 期待:^)
回覆： IS's SPS tank Copy to clipboard
Posted by: TY2
Posted on: 2005-10-23 13:10

嘩, 嘩, 嘩 ...好正阿.......
有d 似係藝術品...... 好正

希望快d 再有相就好啦
回覆： IS's SPS tank Copy to clipboard
Posted by: TY2
Posted on: 2005-10-23 13:10

嘩, 嘩, 嘩 ...好正阿.......:P:P:P
有d 似係藝術品...... 好正

希望快d 再有相就好啦:P:P
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:23

使用左邊第2塊玻璃
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:27

玻璃到8D8D8D
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:36

底缸正面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:38

內隔2層玻璃
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:43

2層玻璃太高 所以拆下重做 前方為6根探針座
左上角預防水滿出的出口及平時換水口
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-10-23 17:48

底缸完成圖 3面貼上黑色卡典西德
回覆： IS's SPS tank Copy to clipboard
Posted by: 洋
Posted on: 2005-10-23 21:37

藝術a>...好靚a
回覆： IS's SPS tank Copy to clipboard
Posted by: TY2
Posted on: 2005-10-23 22:37

正, 正, 正 :P

以為個櫃正啦...... (已經成地口水. :}) )
原來個缸都咁有睇頭....

IS 兄請post 多 d 相上來.
回覆： IS's SPS tank Copy to clipboard
Posted by: alienwalker
Posted on: 2005-10-24 12:30

好勁喎! :D
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:39

主缸正面 ( 分3個出水口 )
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:45

滴流板
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:47

使用2種不同的過濾棉
第一層使用細棉
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:51

右下角開一孔預防細棉阻塞而漏水
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:53

共分3層過濾層
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 20:55

缸子側面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-05 21:00

完成圖 ( 背面貼上黑色卡典西德 因為採用裸缸所以底部撲上2公分砧板 )
回覆： IS's SPS tank Copy to clipboard
Posted by: 小羔羊
Posted on: 2005-11-06 04:49

期待呀...............

好有參考價值
回覆： IS's SPS tank Copy to clipboard
Posted by: ivan0227
Posted on: 2005-11-07 01:26

嘩, ,型呀, 期待.:P
回覆： IS's SPS tank Copy to clipboard
Posted by: 玩玩魚魚
Posted on: 2005-11-09 18:14

嘩！！！！:O)
好正好有西方皇室宮殿feel~~~~~~~:P
係咪專養∼∼太后呀？:D
回覆： IS's SPS tank Copy to clipboard
Posted by: yeung992002
Posted on: 2005-11-11 05:48

等我頂上去先,
好期待呀!!!!!!!!!!!!!!!!!!

有一個問題, 就係你唔驚漏水嗎, 缸背開三個洞,
其實在缸頂駁喉, 效果應該差不多?????
因為見你的開孔也很近水面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-11 06:21

小羔羊兄
　　希望這缸可以提供你一些新的想法

TY2兄
　　還有一些圖還沒上線　請在多多指教　

玩玩魚魚 兄
       謝謝 是養sps缸

yeung992002兄
       香港和台灣配管的方式有點不同 把水塔頭鎖緊應該可以
       不是太大的問題
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:49

五組不同的管件

一
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:50

二
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:51

三
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:52

四
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:52

五
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:56

全部分為可拆式設計 除了背部管路部份 因為靠牆沒辦法碰觸
下水口尺寸為美規2 inch 其餘為1 inch
旁邊畫圓的地方為鑽孔位置連接前後管路

下水口
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:57

這是前後管路連接的樣子 尺寸為1 也是唯一沒辦法拆卸的地方
右邊的閥門是關閉 避免出水入水搞在一起
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:58

使用1的止逆閥來避免淹水
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 10:59

右邊為鈣反使用 中間為換水 只要打開水就可以延著管路流出室外
不過必須把右邊45度角開口給關起來 這個是預防淹水的出水口
左手邊是多出來 假設以後需要放水到底缸可使用這個
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:00

正面完成圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:01

背面完成圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:02

側面完成圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:03

草稿圖

最初設計
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:04

定案成型
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:06

背面樣子
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-18 11:09

鈣反及鋼瓶就定位 使用黃帶預防地震時掉落
回覆： IS's SPS tank Copy to clipboard
Posted by: magdon
Posted on: 2005-11-28 13:41

哇!! 巧靚呀.....無相la?!
回覆： IS's SPS tank Copy to clipboard
Posted by: tlam
Posted on: 2005-11-28 14:45

你D管道駁得好靚好整齊 8D

海水的侵蝕是十分厲害, 不知你的底櫃有沒有些特別的防侵蝕設施 :?)
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-11-29 20:24

謝謝　櫃子有經過防鏽鍍鋅處理
　　
回覆： IS's SPS tank Copy to clipboard
Posted by: yeung992002
Posted on: 2005-12-13 05:56

好耐冇update.......
期待中
回覆： IS's SPS tank Copy to clipboard
Posted by: PP-HK
Posted on: 2005-12-13 09:48

很專業, 讚!

請問上落水接通有甚麼作用呢? 底缸前面那排喉的設計有甚麼用途?

期待完成照片。:P:P:P
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-12-13 12:23

請問上落水接通有甚麼作用呢?
抱歉 不懂你的意思 是指最上面挖一個洞然後用2塊玻璃圍起來那部份嗎
如果是 那是因為上面用很細的濾棉 如果將來阻塞 一部份的水可由那流下
減少水災的傷害

底缸前面那排喉的設計有甚麼用途?
是探針插座 用來測量水質
回覆： IS's SPS tank Copy to clipboard
Posted by: PP-HK
Posted on: 2005-12-13 14:40

謝謝回答, 回應之前的問題, 我是指這裡。
回覆： IS's SPS tank Copy to clipboard
Posted by: ahchung
Posted on: 2005-12-13 16:54

想看看角角.

另角缸很少用綿.有什麼特別原因?
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-12-13 18:52

你的意思是入水口和出水口的管子為何連接在一起
純粹是為了好看 把管子做一個延伸
才不會斷了一節 為了怕入水和出水的水量混合在一起
右邊那一個閥門是關閉的 這樣就形成2個獨立的水道

角缸用綿純粹是想在第一時間把髒東西濾掉
因為空間不夠 所以只好把腦筋動到這地方
回覆： IS's SPS tank Copy to clipboard
Posted by: PP-HK
Posted on: 2005-12-13 22:48

原來如此, 見到個閘制我是明白上、落水不會混合的。

不知個缸進度如何呢, 何時再有相看?
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2005-12-14 06:46

過幾天比較有空再貼新的進度 謝謝
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:38

左為朋友的 BK300 右為小弟的 BK400
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:41

馬達型號 2250 耗電60W，進水量4000L/hr，進氣量2250L/hr ， 鈦合金葉片
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:42

400內置型側面照
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:43

400 內置型和 AB SHORTY 5000 大小比較圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:45

運轉圖 因為不曉得浴缸沒辦法緊密 發現時水已經快到吸水口了
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-02 06:46

因為無知 放了豆漿測試 產生了油質 導至拍照時泡泡還沒完全變的很細膩
此次測試約15分鐘 因為浴缸漏水而草草結束 不過豆漿約10分鍾後打出
回覆： IS's SPS tank Copy to clipboard
Posted by: GC9342
Posted on: 2006-01-02 22:47

hi! is兄,請問這個化氮,可處理幾多L水,那處可有它的支料,生產地?thx
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-03 06:49

GC9342兄
      處理水量 1500 – 4000 l/h 德國製造
原廠網站 http://english.royal-exclusiv.de/index2.htm
美國網站 http://www.captiveoceans.com/products-royalexclusiv.html
回覆： 回覆： IS's SPS tank Copy to clipboard
Posted by: alienwalker
Posted on: 2006-01-05 11:30

IS wrote:
400 內置型和 AB SHORTY 5000 大小比較圖



勁喎!!!! bubble king !! :D :)
回覆： IS's SPS tank Copy to clipboard
Posted by: GC9342
Posted on: 2006-01-06 00:15

IS兄您好! 個化氮好很勁!!!!!!,邊處有得買,可否告知,香港有沒有代理.
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-06 00:24

香港有無代理商並不清楚
小弟跟台灣代理商買的 可以和這網站的人連絡
台灣目前知道約快10隻蛋白 都是跟此代理商購買
比自己購買還便宜而且是從德國直接過來
http://www.spsgarden.com.tw/
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 13:58

Deltec PF600 鈣反
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:00

添購一台便宜的RO機
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:03

JNS沸石桶+ Eheim 1250 及 鈣反小型濾水器 (吸收鈣反出水的PO4)
JNS為國內最優良廠商　手藝及質感符合小弟挑剔的精神
http://www.jns.idv.tw/
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:04

12米鈦管來配合1.8頓分離式冷氣
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:06

底缸上空照
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:08

側面照
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-01-29 14:11

正面照（主馬達尚未到位及缺少放置活性碳的小盒子）　
回覆： IS's SPS tank Copy to clipboard
Posted by: tai8ming8
Posted on: 2006-01-29 15:21

好opr
回覆： IS's SPS tank Copy to clipboard
Posted by: tai8ming8
Posted on: 2006-01-29 15:22

好opr 呀
回覆： IS's SPS tank Copy to clipboard
Posted by: tai8ming8
Posted on: 2006-01-29 15:22

好opr 呀精采
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:22

心臟地帶
正面雛型
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:24

測面 ( 上第一層底漆 分3個獨立開關門 )
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:24

正面 ( 上第二層底漆 )
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:26

正面 ( 內加一片8MM德國超白玻璃 )
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:28

設計好位置 請工廠雷射切割 (第一面)
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:29

為了怕魔鬼[$#27617]和黑色底漆相斥 所以直接黏上去 再用螺絲片固定住
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:30

完成圖
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:32

第二面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:33

為求美觀 把Tunze 外殼銀色部份漆上相同顏色
左邊開關為220v 右邊開關為110v
為求保險使用2顆溫度感應器
當冷卻機運轉時 中間圓型綠色燈泡會亮起
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:34

第三面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:36

因為安定器要全部放在一起 所以捨棄傳統式 採用比較不佔空間的icecap
右邊為2顆250瓦HQI 其次為T5 再來是VHO
右邊放一台龍捲風風扇來散熱 旁邊加上另一台往下吹形成對流 )
最左邊原本打算放 Tunze 變壓器 但因為太重 所以作罷
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:37

第四面
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:38

完成圖
右邊插座為220v 左邊插座為110v
左上第一個無絨絲為總開關 再來是冷氣 電燈 馬達
下方為110v 下方右邊那個是給冷氣用的
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:40

正面照
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:44

背面照 ( X10 及 UPS就定位)
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:47

側面照（ UPS電池及Tunze 變壓器就定位　所有空間完全有效的利用）　
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:48

Tunze 變壓器鎖住方式
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-11 14:49

UPS及使用電池（搭配Tunze ６０００）　
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-02-11 23:06

師兄,好專業呀,你是不是做水族工程
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-12 17:54

不是 只是對東西比較要求美感罷了
回覆： IS's SPS tank Copy to clipboard
Posted by: tlam
Posted on: 2006-02-12 18:20

單是看缸櫃本身就已經十分有觀賞價值.

正!
回覆： IS's SPS tank Copy to clipboard
Posted by: 砌砌砌
Posted on: 2006-02-12 18:20

有要求才有進步~讚!
回覆： IS's SPS tank Copy to clipboard
Posted by: alienwalker
Posted on: 2006-02-13 11:35

好 Pro :)
一個系統SPS缸器材設備最齊! :P:)
回覆： IS's SPS tank Copy to clipboard
Posted by: house
Posted on: 2006-02-13 13:11

好正, 專業, 期待中.....
回覆： IS's SPS tank Copy to clipboard
Posted by: jpang
Posted on: 2006-02-16 15:39

Wa...IS兄你中左六合彩呀....哈哈..講笑....期待期待
回覆： IS's SPS tank Copy to clipboard
Posted by: jpang
Posted on: 2006-02-16 15:48

IS兄 忘記告訴小心T5HO and VHO lamp cable maybe not enough long to reach the lamps, I think your all lamps should put at a top of you tank, so you should think about it.
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-02-16 19:23

jpang 兄
     謝謝提醒 原本就是打算用電線連接拉長 沒辦法放在上面
    不美觀又沒位置 過一陣子再貼燈具 你就了解了
回覆： IS's SPS tank Copy to clipboard
Posted by: 大頭蝦
Posted on: 2006-02-18 02:08

睇到個人呆晒, 一個字:勁!!
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-04-09 16:17

師兄,有冇新相睇呀?好期待
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 17:56

燈具反射板完成圖　尺寸和主缸一樣大　全為可拆式設計
前後斜度為T5 及VHO裝設位置
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 17:58

為了隱藏線路　幫它穿件外套　
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 17:59

組裝起來的樣子
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 18:06

內部為鏡面反射面　前後反設板孔的位置比較短的是給T5使用
中間2孔為風扇孔 左右為各一顆LA reflector ( 圖片還沒裝上 )
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 18:08

原廠 LA reflector 的樣子 台灣俗稱 " 龜甲 "
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-04-09 18:13

側面照
為了怕移動燈具會晃動　設計在後方的支撐點
整組重量約 41 公斤 很重 目前還需製作一個支撐架
將來燈具可以左右移動及調整高度　等支撐架完工
燈組會送去烤漆 這樣燈組就大工告成 　
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-04-10 04:22

謝謝
回覆： IS's SPS tank Copy to clipboard
Posted by: 屎太濃
Posted on: 2006-04-12 11:29

慢工出細貨,勁
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-05-12 00:29

IS 兄,你個魚缸進展如何呀?有冇新相睇呀?
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-05-12 00:32

IS 兄,你個魚缸進展如何呀?又有冇新相睇呀?
回覆： IS's SPS tank Copy to clipboard
Posted by: IS
Posted on: 2006-05-13 05:51

最近一直都很忙 沒時間貼圖 最新進度 請參考這裡 謝謝
http://www.ph84.idv.tw/cgi-bin/board/topic.cgi?forum=15&topic=1071&start=0&show=25
回覆： IS's SPS tank Copy to clipboard
Posted by: fat2005b
Posted on: 2006-08-21 03:17

師兄,你個缸進展如何呀?
我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:1.12, System:0.11, Children of user:0, Children of system:0.01


請大家技持更換新主機啦, 多謝!