Topic: Kent Skimmer 比Ｄ意見

  Print this page
Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: marco
Posted on: 2002-08-25 19:40

我想買Kent Skimmer , 有冇魚友用過？現時水量為450L,但几個月後會轉大缸850L,因Kent 寫明可造到1100L水量，所以日後唔使換，請大家比Ｄ意見。;)
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: 林哥仔
Posted on: 2002-08-25 23:01

不如你自己試左先.....跟住話俾大家知....
唔o岩用咪放出黎law
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-11 01:41

Hi Marco,

其實Kent支TE Skimmer好易set, 當開始時需要2日時間行順, 然後調教出水支tube控制打出黎D污物(支出水tube越低越傑), 當換走杯裏D污物後, 只需2小時便回復完狀, 但耍注意上水泵,一定要照足KENT指定的水流量, 因為佢個設計好特別, 唔同一般Skimmer, 當個泵上水時中間下面個膠擋住D水直接上, 原來佢用龍捲風型式轉住上去, 所以唔需要好勁既泵(慳水慳力). 等到D水停到一個位置先至好開個氣泵. 仲有要注意按駁方法, 因唔係好多人買,D鋪頭SALES唔識駁, 我係大X蕉買時個Sales教錯曬(完全唔識駁), 好彩買之前去過Kent個web site睇過, 唔係就大碌獲, 正確方法將個黑色入水膠駁到個泵入水位, 要後用氣喉駁到黑色膠入氣位(記得用高壓硬氣喉6mm X 4mm), 個泵出水位直駁支Tube入水位(記得每邊加個碼索緊絛喉, 效果好好多), 千奇唔好掉轉頭將個黑色入水膠駁到出水位(個個老細都教係錯既,因為D氣唔夠及D泡唔夠細), 不防買之前參考下www.kentmarine.com, 以上方法由Kent技術人員指導, 特別要多謝曾經幫助Setup既Chris及John.
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: zzz
Posted on: 2003-01-11 13:18

Aris :

你覺得好吾好用ar，可吾可講買左幾錢，連吾連泵ga!

thanks
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-11 18:03

zzz,

一定好過Jetskim的Skimmer, 最緊要系易教, 同埋慳水慳電(即慳錢), 記得
要放係沙缸入面用, 唔需要理浸水位高低, 總之先開上水泵等佢上到一定水位後再開氣泵, D泡打得好鬼細同好密, 仲有反應好快, 我開左成4星期, 頭2天水唔係好傑(要2日時間行順),跟住[$#36223]打[$#36223]傑, 之後仲打到無野打(得白泡), 我試過掉隻蝦去個缸到, 數分鐘後即有反應, 我對之Skimmer極度滿意, 有問題即刻Send個E-mail去Kent Support,半日倒即回覆, 有幾多間會有呢D服務? 我用緊Suchuran Pico鈣反應器有唔明地方Send左十幾封E-mail去Suchuran問,到今時今日到未覆(非常失望並且決定唔再買佢地D Product), 價錢雖然貴D成支連泵賣$1900(大隻蕉,記得講價$1850或以下), 但日後換缸唔使換個隻, 都物超所值(見仁見智la~), 大隻蕉跟隻RIO 2500泵, 官方指最好用RIO 2500/MAG DRIVE 700泵,當然後者襟用D啦! 希望以上資料可以幫到手! 如果唔明即管Post message介時幫到一定幫@@@
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: yinchai
Posted on: 2003-01-11 21:41

Hello Aris:
利害...利害....:P:D
可不可以post 一下支skimmer Body ....同打出來的東西照片...?
些些里..:D
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-11 23:51

yinchai,

Sorry ar! 等我同個缸做完小手術(開個洞)就post個主缸連沙缸D相俾大家睇, 到時攪完係Chat Room send條link俾大家睇!
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: yinchai
Posted on: 2003-01-12 13:35

Aris:
Thanks....wait your good news....:P:D
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: zzz
Posted on: 2003-01-12 23:57

Aris :
多謝你的回答，因我正在考慮用什麼Skimmer ？
可否說說Kent Skimmer 的size想知放不放得到！
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-13 09:46

Hi ZZZ,

Please see the below information which provided by Kent TE PDF :-

Overall Height : 23" or 58cm
Overall Width : 8 1/4" or 21cm
Pump flow rate : 650-900 gph or 2461-3407lph at 0' head pressure
Max capacity : 300 gallons or 1136 liters actual water volume
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: JW
Posted on: 2003-01-20 18:34

Aris,
I'm interested in the Kent TE as well. Can you tell me the noise level and is there any solution if it is loud ?
Thanks,
JW
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-21 00:48

Hi JW,

Don't worry about the noise which designed so quite with RIO pump. I'm also hate the noise ha ha.....
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: JW
Posted on: 2003-01-21 09:54

The RIO pump is a special one or just regular RIO.
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-21 12:05

Hi JW,

"RIO 2500" is a regular pump or even use the better one "MAG DRIVE 700"
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: JW
Posted on: 2003-01-21 16:39

Hi Aris,
Is MAG DRIVE 700 available in Hk ?
Cheers,
James
回覆： Kent Skimmer 比Ｄ意見 Copy to clipboard
Posted by: Aris
Posted on: 2003-01-21 17:12

Hi James,

I saw it in Fish Street before around $700, But now I didn't see it, Try to order or login to Chat room for ask!
我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:0.27, System:0.02, Children of user:0, Children of system:0


請大家技持更換新主機啦, 多謝!