Topic: ivan0227-FOT(08-2005)

  Print this page
ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 20:15

40"x18"x30"滴漏缸.
全缸照.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: nebula
Posted on: 2005-08-13 22:00

幾正，我都想個缸水位高D。
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: Lord,Darth Bane
Posted on: 2005-08-13 22:10

藍圈左邊哥條係咪耳班？

好似唔同平時哥d，高身咁多咁ge ？
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: GTI
Posted on: 2005-08-13 23:10

吾係用生物石吧？
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:18

nebula wrote:
幾正，我都想個缸水位高D。


0甘快d轉缸啦.:D
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:19

Lord,Darth Bane wrote:
藍圈左邊哥條係咪耳班？

好似唔同平時哥d，高身咁多咁ge ？


係高身耳斑.:P
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:20

GTI wrote:
吾係用生物石吧？


死生物石0黎KA.:)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:29

:)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:33

無"麥"藍面.(由未變到而家):D
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:36

以前係0甘0既.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:38

幢仔以前係0甘0既.(D色幾正!!):P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-13 23:41

而家0既幢仔, 變0左唔少, 但無咩點大.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 馬交魚
Posted on: 2005-08-14 01:53

o你既橦仔都唔錯啊　我既買左快９個月啦　一的都冇大過的色又甩又好ｔｈｉｎ
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-16 00:47

:D
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-19 10:09

ivan, 幾寸水喉? 4個出水口OK啦...
PJ7000要用一寸喉喎, 唔係既話D水會弱左架...
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-19 10:13

如果覺得水流唔夠...
平 : 加兩個SEIO M820 係水面落少少, 一左一右對射, 用時間制控制開關...
中 : 加2~4個 M820 + RedSea WaveMaster Pro, 全自動控制, 唔錯...
貴 : 大佬輩既Tunze....不過你個缸唔夠大, 頂唔順:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ckkricky
Posted on: 2005-08-19 13:33

白熊兄,
你提議: 中 : 加2~4個 M820 + RedSea WaveMaster Pro, 全自動控制, 唔錯...

大約要幾多錢呀? 有否辦法幫我找一套呀? 唔該.....
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-19 14:31

http://www.marinedepot.com/homepage.asp?ast=&key=
RedSea哩度最平...
SEIO, 搵呀Wing, 唔貴, 又方便....我都同佢買左兩隻:)
不過RedSea我仲未見到有220V版本, 咁你可以要用哂110V既redsea同seio
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ckkricky
Posted on: 2005-08-19 14:40

找過wing兄, 但佢無覆我呀..:(

唔該晒白熊兄.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-19 17:37

thx白熊, 好似steven0甘set(兩個出水;1個向滴漏槽, 另一個向底)又點睇?
http://www.aquarium.org.hk/cgi-bin/ch/topic_show.cgi?id=17650&pg=10&h=1&bpg=1&age=0
http://www.aquarium.org.hk/cgi-bin/ch/topic_show.cgi?id=17650&pg=11&h=1&bpg=1&age=30
另外平0個隻造流器幾多火?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-19 17:39

睇到la, 15w, 幾正喎, 魚街有無得賣?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-19 17:44

:)白熊, 呢張更清楚.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-19 17:52

ckkricky, 呀wing 佢有留低電話架...96344557
不過佢話SEIO暫時斷貨, 要遲D先再有供應...

ivan0227, M820 220V係15W, 要三百幾; 110V係18W, 要二百幾...
水喉點set, 其實好睇個人...主要係控制到最少死位出現就得....
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-19 18:01

如果好似張相0甘set兩個, 會唔會集中d, 勁d, d魚開心d呢?(有大水流沖)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ckkricky
Posted on: 2005-08-19 23:50

唔該晒白熊兄..

唔好意思ivan, 借你呢度問野添..:I
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-20 00:13

ckkricky wrote:
唔該晒白熊兄..

唔好意思ivan, 借你呢度問野添..:I


:)無所謂.
0岩0岩手痕整左上水喉,聽日試下咩效果先.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-20 00:13

另一角度.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 七仔
Posted on: 2005-08-20 02:44

唔知T出黎果咀會唔會唔夠力呢？可否試後告訴？
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-20 11:13

七仔 wrote:
唔知T出黎果咀會唔會唔夠力呢？可否試後告訴？


可以,不過今日無時間攪.:(
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-21 01:53

:)黃圈.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-21 09:30

有無魚友話我知點鬆個急輪呢?(落到手,不過發唔到力呀?:()
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 七仔
Posted on: 2005-08-21 14:22

係發唔到力還是驚用力扭鬆牙咀？
一手[$#25592]住活接下面條喉，另一手扭急輪。其實急輪唔洗扭得太死。
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-22 00:35

:)急輪改呢到.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-22 10:42

七仔 wrote:
係發唔到力還是驚用力扭鬆牙咀？
一手[$#25592]住活接下面條喉，另一手扭急輪。其實急輪唔洗扭得太死。


七仔,係個活接太近滴漏槽角lock頭位,所以米伸唔晒隻水law,失敗呀.:(
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-22 13:43

:D頭先甩埋個牙咀,終於成功換左新上水喉la.(參考steven.:P)d魚魚走去角落沖水流,好過癮!!
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: steven
Posted on: 2005-08-22 14:18

有冇試過停泵，沙缸食唔食得晒d水:D
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-22 14:23

steven wrote:
有冇試過停泵，沙缸食唔食得晒d水:D


我0係條短仔鑽左個吼,不過兩個水流都爭幾遠,可能T後+閘掣.(再改)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 00:22

全缸照.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 00:25

下滴漏用膠片降低梳0既高度.再觀察幾日睇下角落會唔會有死水位.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: Podo
Posted on: 2005-08-23 13:39

Hi ivan, new design really better than old one?
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 17:21

Podo wrote:
Hi ivan, new design really better than old one?


似乎唔錯,魚都係鍾意大水流ka.Podo,你頭像果條係米埃及/東非紫月?好正喎!!:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 18:36

just 0甘扁左兩個出水,勁好多.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 18:37

水面情況.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 18:37

水底.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 18:38

下入水位.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 23:06

:)set好晒影張全缸相先.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-23 23:12

如果0甘改唔知得唔得呢?(紅色)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 七仔
Posted on: 2005-08-24 11:52

人望高處，水向低流。點控制橫出水量至理想程度？直出的水壓能否足夠將水谷向橫出？
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 11:56

七仔 wrote:
人望高處，水向低流。點控制橫出水量至理想程度？直出的水壓能否足夠將水谷向橫出？


hi,七仔,你意思現況家紅筆果part?
回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 11:59

ivan0227 wrote:
hi,七仔,你意思現況定指紅筆果part?

回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: Podo
Posted on: 2005-08-24 12:23

ivan0227 wrote:
Podo wrote:
Hi ivan, new design really better than old one?


似乎唔錯,魚都係鍾意大水流ka.Podo,你頭像果條係米埃及/東非紫月?好正喎!!:P



東非紫月 ar....I saw you have one too :D
Want to ask you one more thing ar ~ Do you feel enough water flow strength to blow the whole bottom of tank for cleaning up the dirty stuffs? If yes, may be I will set up my water flow system as you hahaha~
Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: eric_leung
Posted on: 2005-08-24 12:57

ivan0227 wrote:
如果0甘改唔知得唔得呢?(紅色)



Hi Ivan 0227,
小弟[$#22000]缸同你[$#22000]差不多大 (48" x 18" x 30") 見水28"，缸頂離地約70"高，用Sisi 5000L/hr 上水泵 + 3 個同水流方向出水口，分別直落90度最遠缸邊一個、中間水面一個及近落水溝45度一個。還可以收受。

不如 post [$#21523]你[$#22000]沙缸同上水泵，等我學[$#21523]野:D！
回覆： 回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 20:05


東非紫月 ar....I saw you have one too :D
Want to ask you one more thing ar ~ Do you feel enough water flow strength to blow the whole bottom of tank for cleaning up the dirty stuffs? If yes, may be I will set up my water flow system as you hahaha~


你條正好多!!:D.我覺得集中左兩個出水口d水流係強好多,暫時無咩死水位.
回覆： Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 20:07

Hi Ivan 0227,
小弟[$#22000]缸同你[$#22000]差不多大 (48" x 18" x 30") 見水28"，缸頂離地約70"高，用Sisi 5000L/hr 上水泵 + 3 個同水流方向出水口，分別直落90度最遠缸邊一個、中間水面一個及近落水溝45度一個。還可以收受。

不如 post [$#21523]你[$#22000]沙缸同上水泵，等我學[$#21523]野:D！


我缸40"乍,48"都爭好遠,米講笑la,我0甘水皮,點敢教人呢.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 20:42

0岩0岩黐左新0野,聽日試下先.(1"刁1"1/2)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 20:52

:D學人post movie,睇下得唔得先.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 岩礁園丁
Posted on: 2005-08-24 22:01

過左T曲先至刁細合理D...
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 22:03

岩礁園丁 wrote:
過左T曲先至刁細合理D...


點解?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 岩礁園丁
Posted on: 2005-08-24 22:08

即係一大>二小, 冇咁頂泵.

而家等於一小>二小, 頂泵, 水力弱左.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 22:19

0甘係米1"x1/2"T>1"x1/2刁>1/2"曲?
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: steven
Posted on: 2005-08-24 22:21

ivan0227 wrote:
0甘係米1"x1/2"T>1"x1/2刁>1/2"曲?



都話直落先練扁佢囉xx(
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-24 22:49

唔怕,個鴨咀可以蚊出0黎.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 岩礁園丁
Posted on: 2005-08-24 23:36

ivan0227 wrote:
0甘係米1"x1/2"T>1"x1/2刁>1/2"曲?



唔識睇你呢條方程式...:D
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 00:26

即係0甘.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 岩礁園丁
Posted on: 2005-08-25 00:46

咁....
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 00:50

刁士係1"x1/2"定係1"x3/4"?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 11:05

:)即係0甘.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 11:10

:)0甘又得唔得?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-25 11:30

仲有, 漏左個波子制, 你點可以控制每一個出水口既出水量?
PJ7000只用兩個出水口? 起碼三個啦, D水勁過頭喎.....
7800L, 當打個七折, 都有5000L/H....得兩個出水口, lost 好多喎...
不如係底柜度"T"多條喉去水冷及沙樽....
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 七仔
Posted on: 2005-08-25 11:30

1" x 1/2" T 係咪即係話由1"喉T出4分喉呀？
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 11:39

白熊 wrote:
仲有, 漏左個波子制, 你點可以控制每一個出水口既出水量?
PJ7000只用兩個出水口? 起碼三個啦, D水勁過頭喎.....
7800L, 當打個七折, 都有5000L/H....得兩個出水口, lost 好多喎...
不如係底柜度"T"多條喉去水冷及沙樽....


我水冷已經用虹吸la.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 11:40

七仔 wrote:
1" x 1/2" T 係咪即係話由1"喉T出4分喉呀？


個T兩頭1",橫出1/2".
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 12:00

:)白熊,有咩意見?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-25 12:09

出水口少過頭囉....起碼加多一個8D
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 12:10

吹邊到?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-25 12:29

吹邊度都好, 只係感覺出水口"面積"太小, 浪費左個出水量...
你睇下, 我個RT一出四都得....
八爪魚由底改左上缸頂, 再一出四...
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 12:36

太多出水口(e.g4個),會唔會減弱水流?我見d魚鍾意大水流喎.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 12:48

白熊,你上水喉同分支喉係咩Size?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-25 15:00

粗既係一吋, 幼既係六分

張相太舊, 其實右邊個出水口加左個波子制...
其他既出水口我用出水口既"鴨咀"大小黎控制...
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 16:07

:)Thx,白熊,我睇返你個post,有成5個出水口喎,其實缸底part係咩0黎ka?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 19:16

:P有好心大發現!!!!大家估下我發3左d咩?
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: steven
Posted on: 2005-08-25 19:19

ivan0227 wrote:
:P有好心大發現!!!!大家估下我發3左d咩?



刁黎又刁去.........:~)

發髦囉:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 19:32

:P大發現係條耳斑,可以留意movie最尾部份.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 19:33

:)整張法仔相先,近排d0既顏色真係正左.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 19:40

有閃光燈影唔多靚.:(
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 白熊
Posted on: 2005-08-25 20:22

大家研究下啫:)
兩個出水口真係少左DD....我意思就係話會"頂泵", 其實唔想頂泵好簡單, 只要將兩條唔係咁主要既出水口加上波子制, 收細哩兩個制而令主出水量合乎你滿意, 咁個出水量就會係無咁"浪費"啦....
記注, 波子制其實個孔好細, 波子制之後最好立即"刁"細條喉....

RT下面個組係藏係沙底既八爪魚造流器, 但因為水泵揚程唔夠, 又唔想用大水泵, 所以搬左上缸頂用其中一條出水口推.....仲慳返一個泵添:P
Re: 回覆： Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: eric_leung
Posted on: 2005-08-25 21:39

ivan0227 wrote:
Hi Ivan 0227,
小弟[$#22000]缸同你[$#22000]差不多大 (48" x 18" x 30") 見水28"，缸頂離地約70"高，用Sisi 5000L/hr 上水泵 + 3 個同水流方向出水口，分別直落90度最遠缸邊一個、中間水面一個及近落水溝45度一個。還可以收受。

不如 post [$#21523]你[$#22000]沙缸同上水泵，等我學[$#21523]野:D！


我缸40"乍,48"都爭好遠,米講笑la,我0甘水皮,點敢教人呢.



不是用大缸買貴魚，就叫做叻或勁:D:D:D。
平魚貴魚，大缸細缸，都是生命同興趣:P:P:P，亦沒有成功或唔成功:^):^):^)。
只不過大家都是魚痴 / 魚友透過Internet，交談[$#21523]心得同苦與樂經驗，
從中互相可以提升[$#21523](我想).................................:D

大家見到你為[$#21655]出水口間題，亦會出[$#21523]手講[$#21523]野吹[$#21523]水:D:D:})。
我亦透過此綱吸收了不少新知識，當然當中有D是笑料亦有堅料，
只要慢慢參長，一定找到你要野:):):)。

願祝你缸魚健康長大:)。
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 21:40

0甘我果兩條+閘制喉0係邊到T出0黎呢?點吹法?
回覆： Re: 回覆： Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-25 22:28

eric leung wrote:
不是用大缸買貴魚，就叫做叻或勁:D:D:D。
平魚貴魚，大缸細缸，都是生命同興趣:P:P:P，亦沒有成功或唔成功:^):^):^)。
只不過大家都是魚痴 / 魚友透過Internet，交談[$#21523]心得同苦與樂經驗，
從中互相可以提升[$#21523](我想).................................:D

大家見到你為[$#21655]出水口間題，亦會出[$#21523]手講[$#21523]野吹[$#21523]水:D:D:})。
我亦透過此綱吸收了不少新知識，當然當中有D是笑料亦有堅料，
只要慢慢參長，一定找到你要野:):):)。

願祝你缸魚健康長大:)。


:)eric, 大家交流下,我都好鍾意,真係學到唔少0野,
e.g我之前no3高,0係呢到出post,就有魚友搵到原因,從而得到改善,而家d魚魚因水質靚左個態, d色都爭好遠.
真係要多謝鬧市魚友.;)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-26 23:38

有兩條劍仔.;P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-26 23:54

:)又玩0野.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-27 00:40

:)尺寸如下.
Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: eric_leung
Posted on: 2005-08-27 11:16

ivan0227 wrote:
:)尺寸如下.



Hi Ivan0227兄！

會唔會攪Lee攪Lo最後得...........................:D？
缸長度比較短，但深度有30吋應否從深度[$#30528]眼.....................有D深度:D？

[$#29482](up)一通，只作參考:P:P:P！
回覆： Re: 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-27 11:42

eric leung wrote:
Hi Ivan0227兄！
會唔會攪Lee攪Lo最後得...........................:D？
缸長度比較短，但深度有30吋應否從深度[$#30528]眼.....................有D深度:D？
[$#29482](up)一通，只作參考:P:P:P！


:)詆多幾次無所謂0既,唔得米又轉返之前0甘law,但試都唔試就唔會知咩係最好.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-29 13:44

:)
1)第1 個,純粹做士啤,校少少,可防虹吸.
2)第2個,主力,1"45度直出.
3)第3個直落吹底,比之前0既set法弱左.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-08-29 13:45

另一張.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 七仔
Posted on: 2005-08-30 03:33

ivan0227 wrote:
:)
1)第1 個,純粹做士啤,校少少,可防虹吸.
2)第2個,主力,1"45度直出.
3)第3個直落吹底,比之前0既set法弱左.



唔係由上水牙咀成抽拆出黎咩？要駁網喉[$#22021]？
1-1) 防虹吸應該係吹底條灰喉度鑽孔
2-2) 可45度曲接6分喉出水
3-3) 1"刁6分再接扁咀變相又刁細一級，即係等如4分喉加扁咀，想唔弱都幾難！d水一定係前面個T走晒。6分喉鍊扁咀得啦。
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 01:08

:)造流器.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 21:43

:)下入水.用膠片遮.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 21:43

:)上入水.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 21:44

:)最終用兩個出水口.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 21:46

:)第1個出水口.1"T之後, 兩個3/4"45度曲.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-01 21:46

:)全缸照.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-06 18:38

:)買0左朵花插0下.都係百0蚊,希望養到la.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-07 00:45

浸完淡水浴,落缸la.:)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: cool
Posted on: 2005-09-07 15:49

我估有3條過到一個月
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-07 18:10

:)你估邊3條?
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-07 18:33

:)覺得d蝶魚仔好過癮.:)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-07 18:34

~:)~
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-07 18:53

:)法仔.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: cool
Posted on: 2005-09-08 15:43

真人字, 斜紋, 雙印
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: GTI
Posted on: 2005-09-08 15:48

蝶仔開口未呢？
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-08 17:41

cool wrote:
真人字, 斜紋, 雙印


遲D會有結果.:)
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-08 17:41

GTI wrote:
蝶仔開口未呢？


:(暫時未.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-11 23:57

:)H&S認真堅呀.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-11 23:59

:)小雙印,最好態.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:00

:)小白尾,變多0左幾條紋.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:02

8D鬼鬼鼠鼠.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: steven
Posted on: 2005-09-12 00:02

又加到加魚高鋒期:D
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:06

:I耳斑.19-10-2004新返,而家差不多1年la.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:07

:)仲有.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:09

:)睇返d相都好正!!
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-09-12 00:14

;)我要盡力令佢靚返.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:39

:)好耐無post相la.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:41

:)金蝶.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:42

:)巴士,幫幫我手la.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:45

:)法仔大0左唔少,連個樣都成熟0左d.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:48

:(新皇帝仔, 俾紫月砌,慘.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:50

:)另一面.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:53

:)雖然無"麥",但越來越橙.正.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 21:55

:)惡0野條上劍長0左好多,等緊條下劍.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 22:01

:)耳斑近況.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 22:01

:)0黎多張.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 可力
Posted on: 2005-10-07 22:03

有少少唔好意思..
我想問你係用老仔定T5HO 架？
我見你D光好藍..D魚好靚呀！
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 22:05

:)多謝你0既讚賞,只係普通T5,3藍1白.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 22:08

:)唔知可以玩幾耐呢,但細仙真係好得意.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-07 22:11

:)小白.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 可力
Posted on: 2005-10-07 22:39

ivan0227 wrote:
:)多謝你0既讚賞,只係普通T5,3藍1白.

我都係用T5.2 藍1白.但唔知點解都仲係唔夠藍..睇下支管..先發現2支藍管唔同顏色..藍色有分深淺[$#22175]買GA咩？ ?_?
回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-08 00:46

可力 wrote:
ivan0227 wrote:
:)多謝你0既讚賞,只係普通T5,3藍1白.

我都係用T5.2 藍1白.但唔知點解都仲係唔夠藍..睇下支管..先發現2支藍管唔同顏色..藍色有分深淺[$#22175]買GA咩？ ?_?


:)不大清楚,我d係鴨記cheap 0野.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: skm01
Posted on: 2005-10-08 09:02

ivan0227 wrote:
:)多謝你0既讚賞,只係普通T5,3藍1白.



very good wow..... :)
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-09 00:46

:)新缸都會用返DIY T5.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-09 00:59

:)缸圖.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: dogcake
Posted on: 2005-10-09 12:20

ivan0227 wrote:
:)缸圖.



Mr. Ivan 0227,

Can I have a look at the whole picture of your sump tank?
thanks.
dogcake
回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-09 18:33

dogcake wrote:
Can I have a look at the whole picture of your sump tank?
thanks.
dogcake


:)http://www.aquarium.org.hk/attach/182761-DSC05564-embed.JPG
回覆： 回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: dogcake
Posted on: 2005-10-09 21:03

ivan0227 wrote:
dogcake wrote:
Can I have a look at the whole picture of your sump tank?
thanks.
dogcake


:)http://www.aquarium.org.hk/attach/182761-DSC05564-embed.JPG



see, thank you
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-15 23:20

:)新魚.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-15 23:21

:D:)
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: fish1963
Posted on: 2005-10-16 00:12

ivan0227 wrote:
下滴漏用膠片降低梳0既高度.再觀察幾日睇下角落會唔會有死水位.



請問用乜[$#22050]固定塊膠片呀, 要清缸嗎?
回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-16 00:55

fish1963 wrote:
請問用乜[$#22050]固定塊膠片呀, 要清缸嗎?


自然吸住.
回覆： 回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-16 00:55

fish1963 wrote:
請問用乜[$#22050]固定塊膠片呀, 要清缸嗎?


:)佢會自然吸住.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-20 20:00

:I睇下我條巴士, 肚餓到游去滴漏槽食啡咍, 認真誇張.:P
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-20 20:00

:)漏0左相添.
回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: ivan0227
Posted on: 2005-10-20 20:01

:(都唔知識唔識游返出去.
回覆： 回覆： ivan0227-FOT(08-2005) Copy to clipboard
Posted by: 馬交魚
Posted on: 2005-10-20 20:41

ivan兄你既太后好正啊 開口未呢
我地有 在新的聊天室
即時聊天廣播.
Hosted by DownTown®
All Rights Reserved.

[Processing Time] User:0.85, System:0.08, Children of user:0.01, Children of system:0.02


請大家技持更換新主機啦, 多謝!