Topic: diy~drill hole |
 Print this page
|
| diy~drill hole | Copy to clipboard |
|
Posted by: brendan5 Posted on: 2002-07-31 09:37 2玻璃唔駛五分鐘~....... 參考下 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: yinchai Posted on: 2002-07-31 10:25 B女: 你整咩呀....:?).....滴漏缸...:?) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: 白熊 Posted on: 2002-07-31 11:36 亞福哥, 開工囉喎. 乜點解個"lone"離個角咁開既, 咁你個滴漏槽未好大? | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: brendan5 Posted on: 2002-07-31 13:13 果個係retur pump 個hole lai ga~:D | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: freedom Posted on: 2002-07-31 21:50 嘻嘻、又學到野立，個鑽頭唔知幾錢呢？有冇人知，謝謝。 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Clarencechk Posted on: 2002-07-31 22:03 already memtion in here http://www.aquarium.org.hk/cgi-bin/ch/topic_show.cgi?id=1237&pg=1&bpg=1 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: 白熊 Posted on: 2002-08-01 09:43 亞福哥, 係未有"希望工程"續集睇呀? :) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: brendan5 Posted on: 2002-08-03 08:58 大雄: 梗有啦,,,,,,,,,,,,,,,,,,,,,,,,,..............keke | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-08 14:13 我想係我個主缸到開個"lone" 想由主出水去個草缸, 主缸上草缸下,由草缸pump返d水上主缸,流d水落草缸 鑽lone過陣,我只會放走三分一水, 在正常水位下3寸鑽個1寸lone 有冇咩要注意? 請各位比d意見!:D 我個主缸,個lone係左邊開 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-09 09:43 如果大家都覺得無問題 咁我就開工la~:D | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: choinm Posted on: 2002-08-09 09:57 咪住! 你以前有冇鑽個呀?最好拾塊爛玻璃試o下先。 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-09 10:12 係喎! 我未試過ga~ 好la,等我試鑽完先開工~:D THX! | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Savio Posted on: 2002-08-09 18:22 Newb, 正常水位下3寸鑽個1寸孔, 你一停泵個草缸接得曬0個4吋水架喇?! 有冇計過架? 如果唔得就漏到你成屋都係喎..... 我有個24吋缸都鑽左個1寸孔, 係好近水面開既, 不過太近水面你又要計落唔落得切水, 如果條喉係直落既就一定冇問題, 如果轉多幾個曲就要再計過.... | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Savio Posted on: 2002-08-09 18:27 缸頂鑽一個4分孔上水.... | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: choinm Posted on: 2002-08-09 22:10 請教Savio兄第一幅圖去水喉(很多孔)是買還是自制？ 另去水時會不會有很大噪音？ | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Savio Posted on: 2002-08-09 23:11 Choinm, 是自制既, 好容易做. 正確, 去水孔向上因為會吮氣, 噪音比較大, 但可以吸走油面, 如果要冇噪音, 只要將去水孔轉向下即可. | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-09 23:19 To Savio : 個孔係3寸下 但管a高度可以變... 咁樣應該冇問掛?(我詁) 請指教:) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Savio Posted on: 2002-08-10 01:08 Newb, 咁就冇問題喇, 不過個人覺得依個design比較浪費缸內位置.... | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: choinm Posted on: 2002-08-10 09:47 To Newb: 我個缸都o係o甘設計，試水時o的去水聲好大，成屋都震曬。Savio兄講得o岩，因為會吮氣。好彩我o係用膠紙迫住o的喉，重可以改。 另外接口要保證唔漏水，唔係a位o的水會湧曬落下面。 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-10 14:39 To Savio : ic....我會最量減少浪費空間 :D 如果a位改用軟候 用吸盤調節軟候高度 會唔會好d le? To choinm : Savio兄講得o岩，因為會吮氣。好彩我o係用膠紙迫住o的喉，重可以改。 <=唔明:?) Thanks all~~:) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-10 20:31 TO 白熊: 請問你個"鑽o隆兇器"係邊到買? 五金鋪? 我今日去過五金鋪問. 佢地話得鑽木同鑽鐵兩隻 鑽木過隻中間有支野 鑽鐵過隻得一支野 都唔知點買. B) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: 白熊 Posted on: 2002-08-10 20:53 o向荃灣五金舖買, 我只係話鑽玻璃既, 佢就識比我啦:) http://www.aquarium.org.hk/cgi-bin/ch/threaded_show.cgi?tid=1237&pid=9685&age=0&bpg=1 http://www.aquarium.org.hk/cgi-bin/ch/threaded_show.cgi?tid=1237&pid=9668&age=0&bpg=1 | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: choinm Posted on: 2002-08-10 22:15 To Newb: [$nbsp][$nbsp][$nbsp][$nbsp][$nbsp][$nbsp]硬灰膠喉連接大都是大喉套細喉，中間用一隻o係五金鋪買o的膠喉膠水黐實。乾[$#21655]之後，o的喉就好實淨，唔會甩同漏水。但要改就好難。 [$nbsp][$nbsp][$nbsp][$nbsp][$nbsp]另一種辦法就係用o係五金舖買o既水喉膠布纏係細喉上面，再塞入大喉裏面，o係水壓唔係好大o既地方(例如去水位)，一樣可以做到唔會甩同漏水。好處就係做錯[$#21655]可以改。 [$nbsp][$nbsp][$nbsp][$nbsp][$nbsp][$nbsp]鑽木、鑽鐵、鑽玻璃要用唔同o既鑽頭，如果以前未鑽過o野，一定要小心!小心!! | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-11 11:16 thx choinm,白熊 頂ar, 五金鋪條o靚仔又話冇鑽玻璃用.... | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: qqleo Posted on: 2002-08-11 12:53 Newb 五金鋪條o靚仔又話冇鑽玻璃用.... <=== 佢地無入貨咪會無得賣囉 ~~ 你係邊頭買呀 ?? 旺角新田地街一定有 ! | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-11 16:12 To qqleo : THX ！！！ 我係問佢地有冇鑽玻璃用(有冇這種,唔係問佢有冇得賣)!!! 我住天水圍,所以係天水圍問 有冇知到天水圍有,我試過係天耀同天慈問過都冇 (唔知係咪鄉下地方冇le?):D 唔通要出去!!!B) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: 白熊 Posted on: 2002-08-11 18:37 newb, 你都要出旺角魚街架, 出開黎未可以順便買囉:) | |
| 回覆： diy~drill hole | Copy to clipboard |
|
Posted by: Newb Posted on: 2002-08-12 19:52 最後我都係旺角魚街間五金鋪買 32mm 成64元 (好鬼貴:() | |
即時聊天廣播.
All Rights Reserved.
[Processing Time] User:0.02, System:0, Children of user:0, Children of system:0
請大家技持更換新主機啦, 多謝!