Topic: 馬達問題 |
 Print this page
|
| 馬達問題 | Copy to clipboard |
|
Posted by: pekingman Posted on: 2004-06-05 01:52 我面缸40吋x20吋x30吋高有沙缸 我想問bump應該要幾多L呢? 唔知project 潛水bump 3700L/H夠唔夠呢? 還是去買工業用果d 潛水bump好呢 | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: 鬼鬼 Posted on: 2004-06-05 02:27 我個缸39x18x18吋用5000L/H，兩個出水位都覺唔夠力。 [img]http://www.aquarium.org.hk/attach/114235-IMGP0106-embed.JPG[/img] | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: andyleong Posted on: 2004-06-05 09:16 我用 Iwaki 30-RX 加主缸水流泵都OK, 不過最好用Iwaki 40-RX 或 Iwaki 55-R. Project 潛水bump 3700L/H肯定唔夠. | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: monkey Posted on: 2004-06-05 09:40 pekingman :你個缸起碼要 Iwaki 40-RX . | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: pekingman Posted on: 2004-06-05 16:43 但係我個沙缸無鑽孔用唔到IWAKI既BUMP 一定要用潛水BUMP 知唔知邊到買工業用既BUMP抵呀 | |
| 回覆： 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: galant711 Posted on: 2004-06-05 16:56 pekingman wrote: 但係我個沙缸無鑽孔用唔到IWAKI既BUMP 一定要用潛水BUMP 知唔知邊到買工業用既BUMP抵呀 利可保:)Tel:2495-0707 | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: andyleong Posted on: 2004-06-05 20:36 用 Powerjet 5000 or 7000. | |
| 回覆： 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: haiven Posted on: 2004-06-07 16:24 pekingman wrote: 但係我個沙缸無鑽孔用唔到IWAKI既BUMP 一定要用潛水BUMP 知唔知邊到買工業用既BUMP抵呀 咁又未必∼∼睇睇∼： [img]http://www.aquarium.org.hk/attach/22534-pump1-embed.jpg[/img] 旺角廣未道利可保啦，你個缸，起碼要55-R呀 | |
| 回覆： 馬達問題 | Copy to clipboard |
|
Posted by: pekingman Posted on: 2004-06-09 12:01 HAIVEN唔係要用人手吸滿條管先架咩? | |
即時聊天廣播.
All Rights Reserved.
[Processing Time] User:0.07, System:0, Children of user:0, Children of system:0
請大家技持更換新主機啦, 多謝!